Sunday, October 12, 2014

I know - let's hang an outboard motor on the paddle board!!


No, that was never a consideration...


It was 81º, hazy sunshine, humid, and not much breeze when I got up this morning.  Well, that is as cool as it has been since we got back, I don't have any other chores to get done, so it seemed like a good time to get the paddleboard wet.


Since it was the first time out, it took me a couple minutes to gather up all the gear: swim trunks, a long sleeve shirt, cap, water shoes, PFD, sunglasses... put on the leash, assemble the paddle, check the short rope line on the front... yep, I'm good to go.

Seemed like a lot to do for what I assumed would be a short ride.  Hey, you don't want to over-do it first time out.  It has been 5 months since I've been on the board.  No, it's not like riding a bike... my shaky legs were proof that I was particularly rusty at this.

I did manage to get to the far end of our canal without falling in... now to see if I remember how to turn around... slow and shakey, but I got it done.  Facing up our canal, I could see the sky looking dark and threatening - something moving in!  I paddled back to our dock, dismounted without incident, and pulled the board out.

I got the hose out to rinse off the board and paddle, and planned to get the outboard motor out and started.  No, not to mount up on the paddleboard.  But, like the paddleboard, the motor has been sitting idle since before we left for the Pacific Northwest - it needed to have some gas run through it.

I made an outboard stand from a two-wheel handtruck we have; got that out, mounted the motor on it, and put a tall container under it to hold water.  Before I could get the motor started, it started to rain.  Well, just a little sprinkle at first.  Surprisingly, the motor fired up on the third pull!  Ran nice and smooth... yes, Blue Sta-Bil is your friend.

A few minutes later, the sky opened up and it really poured.  It didn't matter all that much - I was already wet before the rain, thanks to the humidity.  I was expecting the rain to cool things off... I was wrong.  I did retreat up to our deck for a bit, to get out of the downpour.


Now, about mounting that motor on the paddleboard... no, that is probably not a good idea.  Of course, I won't be surprised to hear that some "extreme sport enthusiast" will give it a try, after this post... careful of that prop if you fall off!!*



* The author/owner of this site does NOT recommend you try this.  If you fall off and get chopped to bite-size pieces, it is your own damn fault for doing something that stupid.  Have a nice day.


7 comments:

Charlie-Captain's Cat said...

Why not just put some pontoons on that hand truck, lose the bucket and try that. Don't forget to wear a PFD and bring an anchor and a radio!!

Bill K said...

Jim,
Would you please take a picture of your hand truck setup for mounting the outboard ?

Thank You

Bill Kelleher

Captain Jim and the Blonde said...

Hi Bill. I originally clamped a 2x4 across the uprights of the hand truck, using C-clamps. Did that for several years. With this current set-up, I used a couple U-bolts around the uprights. The handle interferes with putting the motor on there, but you can remove the handle on mine - pull one clip and you have easy access at the top of the hand truck. It is stashed back in our storage right now, but I will take a photo next time I get it out (may be a while).

Bill K said...

OK, thanks for the answer Jim.

Bill Kelleher

Bill K said...

OK, thanks for the answer Jim.

Bill Kelleher

Bill K said...

Blogger said I didn't put in the correct numbers but publish it anyway plus my second try. LOL

Bill Kelleher

Unknown said...

Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big thanks for the useful info.
Outboard for sale